|
|
6 July, 2011
The MOD-8000 online process analyzer is designed to analyze the composition of process fluids. Using Magnetic Resonance (MR) spectroscopic techniques, it can detect the presence and the concentration of chemical constituents in a process stream. By utilizing exclusive software, it provides closed loop supervisory control of a process unit. It has an extensive range of applications from light Naphtha streams to heavy Crude oil. Typical user benefits comprise increased throughput, better process control, timely detection of off-spec product, and lower operating costs.
Highlights of the new systems:
- New magnet design (enhanced long and short term stability; less sensitive to temperature)
- State of the Art electronics (Smaller foot-print; Complete integrated PCB for Shim & Heater Control; Digital RF & Acquisition - improve SNR)
- New concept of Process Probe (An entire pipe go thorough without contact with the system; Much better temperature insulation; Higher Q i.e. better sensitivity)
- New Software (Includes new algorithm for standard and global Models; Fully automated process capacity; Extensive remote diagnostic capabilities)
The new MOD-8000 NMR Analyzer was already installed at two refinery plants for real-time optimization of crude distillation unit against frequent feedstock changes. NMR analyzer provides a continuous flow-through, accurate chemical and physical analysis of multiple components in dense and opaque materials. The main advantage of this technology is linear spectral response across a broad range, which enables models to be extrapolated accurately.
|
Send to a friend
Print page