Electric Traced Bundles

Advantages of Electric Tracers Maintains freeze protection, close temperature tolerances or viscosity control. Excellent for maintaining long, continuous lengths of impulse lines and piping at consistent temperatures. Good for situations where steam is not available or steam supply could be interrupted, such as during shutdowns. Complete design package – we’ll provide engineering support and failure…


pH/ORP and Conductivity Sensors

Offering a superior solution for biotechnology, pharmaceutical, and other ultra-sanitary applications, Modcon’s MOD-P12 allows users to install a wide variety of Ø12 x 120 mm, steam-sterilizable pH electrodes directly inline for the most demanding downstream processes. Where two or three sensors would normally be required, one Modcon conductivity sensor delivers linear and reliable measurements over…


UV Absorption, Transmission and Concentration Sensors

UV Absorption, Transmission and Concentration Sensors Modcon UV sensors can be effectively applied to a broad range of process applications measuring Ultra-violet absorbance, transmittance, optical density, and chemical concentrations from low parts-per-million (PPM), to high percent-levels. These UV analyzers can be calibrated non-intrusively to NIST-traceable standards. Typical UV applications include: Chromatographic separation, amino acid concentration,…


Color and Concentration Sensors

Color and Concentration Sensors Modcon colorimeters, VIS-NIR concentration analyzers, and color monitors are ideal for a multitude of real-time measurements for improved process control. Installed directly in process pipelines, tanks and vessels using flow-through and probe type sensors, these reliable analyzers can be configured to measure the concentration of numerous chemicals and can be correlated…


Turbidity Sensors for particles and Hydrocarbons measurement

Turbidity Sensors Modcon inline turbidity meters, lab turbidimeters, and optical density probes can be specified to measure turbidity, haze, clarity, and optical density in units of: FTU, NTU, EBC, OD, PPM, Percent and many others. Common process applications include: Filter performance and filter break monitoring, hydrocarbons in water , water in fuel,gas bubble detection, particle content…


Process Photometers

МОD-C-4000/8000 Оn-line Process Photometers MOD-C-4000/8000 unique modular design makes it possible to adapt high performance photometric and electro-chemical sensors to virtually any process. This flexibility applies to all sensor types making Modcon sensors suitable for real-time measurements independent of the application, process connection or measuring location. MOD-C-4000/8000 online process sensors are available in either a… Details

Tube Selection for Analyzer Sample Systems

Selecting the right process tube for use in analyzer sample transport systems requires consideration of process and application conditions. There are a wide variety of metallic and non-metallic tubes available: welded and seamless 316 series stainless steel and more exotic alloys are also used. Common non-metallic tube materials are PFA, PFE, and PTFE fluoropolymers polyethylene…


Sample Transport Systems

Sample Transport Systems Sample transport systems present tremendous opportunities for improved analyzer accuracy. Chemical and petrochemical industries around the world have clearly identified that yield, scrap and compliance improvements can be directly attributed to the effectiveness of the sample transport system. Analyzers will function only as well as the transport system yet this same system… Details

Sample Recovery System

Sample Recovery System The Sample Recovery System offered by Modcon designed to collect spent sample from on-line process analyzers and periodically return this sample back to the process lines. 100 liter tank available in Stainless Steel. Tank is equipped with sampleconnection to allow hook-up from one or more analyzers. Tank is equipped with magnetic level switches to…


Closed loop sampling systems

The LPG sample systems enable operators to obtain samples of liquids with high vaporization pressures. Sample is captured in a sample cylinder for easy transportation to the lab. Texas Sampling cylinder saddles help ensure proper alignment and prevent leakage when connecting the cylinder. The cylinder is safely secured to the plate by the saddles. For…


Filter Coalescer

The Modcon MOD-100 Coalescer Filter was developed to provide reliable and efficient fuel and lubricating oil filtration system for mostly petroleum analyzer applications. It is used for separating water from insulating oil, jet fuels, diesel fuels, kerosene and gasoline. According to petroleum production standards the amount of water in fluids should be kept low concentrated.…



Clamp-on non-intrusive ultrasonic flowmeter is ideal for applications carrying crude oil, refined petroleum or liquefied gas. It is available in single, dual and optional four beam configurations, with choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) wall mount enclosures. The meter has two application areas: Volumetric flowmetering and mass/standard volume…



Clamp-on non-intrusive ultrasonic flowmeter is ideal for natural and process gas applications, including checkmetering, allocation, production, storage and gas fired power station applications. The meter is available in single, dual and optional four beam configurations, with your choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) explosion proof enclosures.



The SITRANS P Series DSIII is a precision digital transmitter for pressure, absolute pressure, differential pressure, flow and level and has extensive diagnostics and simulation functions. The standard unit already delivers excellent, TÜV-approved reliability through its evaluation abilities.



Sitrans TF is used where other transmitters can’t cope. Mainly because this field transmitter is IP68 rated. SITRANS TF comes in rugged diecast aluminum or long-lasting high-grade steel. It transforms signals from resistance thermometers, resistance transmitters, thermocouples and voltage transmitters into a load independent DC signal corresponding to the sensor characteristic. The remotely mounted sensor prevents…


Petroleum Products Quality Module

Petroleum Products NIR Analyzer represents a breakthrough in pipeline products identification, their quality and interface on-line monitoring. The intrinsically safe probe and low system cost result from a combination of innovative optics and the patented application of standard, optical, fiber technology to NIR analysis. The Main Analyzer is located in the Operator Room of filling…

Crude analyzer Ronny3

MOD 4100 Crude Oil Analyser

MOD 4100 All-in-One Crude Oil Analyzer On-line quality analysis of the crude oil properties is important to allow evaluating the crude oils at any time. The newly redesigned MOD-4100 crude analyzer represents a breakthrough in crude oil on-line analysis. It is a single analyzer, that performs on-line a variety of different critical crude oil measurements…


Natural Gas Quality Module

Natural gas is a complex mixture of various organic and inorganic components and component groups. A differentiation must be made between flammable hydrocarbons as the actual source of energy and non-flammable components. The wide range of components makes it difficult to reliable determine natural gas qualitatively and quantitatively. For this application Modcon offers complete natural…