Intelligent Blending of automotive Fuels

Refinery products are normally composed of a mixture of different refinery process streams, which are obtained from the fluid catalytic cracking (FCC) naphtha, catalytic reformate,
alkylates, isomerate, and other process streams. Each of these streams contribute to the overall physical properties of the final product and are carefully considered in calculating recipes. The physical properties of gasoline must comply with the required specification, according to regulations and standards that are mandatory in the countries of consumption.

Modcon is pleased to announce its article “Intelligent Blending of automotive Fuels” published in the March 2018 issue of “Hydrocarbon Engineering”.

Intelligent Blending Of Automotive Fuels matters because useful process data has to lead to better operating decisions. In continuous industries, laboratory data remains important, but it represents a sample taken at a particular moment. Online analysers add a different capability: they show how the process is changing between laboratory samples and provide the frequency of information needed for control, optimisation and early detection of abnormal conditions.

In blending optimisation, the analyser specification is only part of the job. Reliable results also depend on how the measurement is installed and operated. That means checking sample representativeness, pressure and temperature, phase behaviour, stream composition, response time, hazardous-area requirements, calibration method and integration with the plant DCS or control system. Even a good analyser can give misleading results when the sample arrives late, changes phase or is conditioned in a way that alters the property being measured.

Our engineering work brings together inline blending, online quality measurement, blend control and giveaway reduction around the actual process objective. The right arrangement may use direct in-situ measurement, an engineered sample conditioning system, optical or thermal-conductivity sensing, NIR analysis, or integration of several measurements into a wider optimisation strategy. Live analyser data can also improve the quality of information available to APC, digital twins and industrial AI by giving these systems current composition and quality data instead of relying only on inferred values.

For intelligent blending of automotive fuels, the final configuration should be checked against the project datasheet and the full operating envelope. The aim is straightforward: a measurement that works under real plant conditions, can be maintained without drama and gives operators information they can use.

Modcon Systems Ltd. develops and integrates process analysis solutions for demanding industrial applications.

[dt_divider style=”thin” /]

Untitled1
Skip to content