On-line process analysers in crude distillation units prevent lost throughput caused by non-conforming process conditions and crude oil switching.
Modcon is pleased to announce its article “Integrated monitoring for optimising crude distillation ” published in the Q1 2012 issue of “Petroleum Technology Quarterly”.
For plant operators, integrated monitoring for optimizing crude distillation is most useful when measurement data can be acted on quickly and with confidence. In continuous industries, laboratory data remains important, but it represents a sample taken at a particular moment. Online analysers add a different capability: they show how the process is changing between laboratory samples and provide the frequency of information needed for control, optimisation and early detection of abnormal conditions.
In industrial AI and process optimisation, the analyser specification is only part of the job. Reliable results also depend on how the measurement is installed and operated. That means checking sample representativeness, pressure and temperature, phase behaviour, stream composition, response time, hazardous-area requirements, calibration method and integration with the plant DCS or control system. Even a good analyser can give misleading results when the sample arrives late, changes phase or is conditioned in a way that alters the property being measured.
Our engineering work brings together industrial AI, process optimisation, real-time data, refinery performance and decision support around the actual process objective. The right arrangement may use direct in-situ measurement, an engineered sample conditioning system, optical or thermal-conductivity sensing, NIR analysis, or integration of several measurements into a wider optimisation strategy. Live analyser data can also improve the quality of information available to APC, digital twins and industrial AI by giving these systems current composition and quality data instead of relying only on inferred values.
For integrated monitoring for optimizing crude distillation, the final configuration should be checked against the project datasheet and the full operating envelope. The aim is straightforward: a measurement that works under real plant conditions, can be maintained without drama and gives operators information they can use.
Optimize is an important part of the application context considered when selecting and integrating the measurement solution.
Optimizing is an important part of the discussion in this article, which examines integrated monitoring for optimizing crude distillation from a practical process-industry perspective.
[dt_divider style=”thin” /]