Baku, Azerbaijan
Good 2nd international scientific practical conference on new technologies in oil gas production baku azerbaijan starts with reliable process information and a clear understanding of how that information will be used. In continuous industries, laboratory data remains important, but it represents a sample taken at a particular moment. Online analysers add a different capability: they show how the process is changing between laboratory samples and provide the frequency of information needed for control, optimisation and early detection of abnormal conditions.
In industry engagement, the analyser specification is only part of the job. Reliable results also depend on how the measurement is installed and operated. That means checking sample representativeness, pressure and temperature, phase behaviour, stream composition, response time, hazardous-area requirements, calibration method and integration with the plant DCS or control system. Even a good analyser can give misleading results when the sample arrives late, changes phase or is conditioned in a way that alters the property being measured.
Our engineering work brings together process analysis, industry collaboration, technical knowledge exchange and emerging applications around the actual process objective. The right arrangement may use direct in-situ measurement, an engineered sample conditioning system, optical or thermal-conductivity sensing, NIR analysis, or integration of several measurements into a wider optimisation strategy. Live analyser data can also improve the quality of information available to APC, digital twins and industrial AI by giving these systems current composition and quality data instead of relying only on inferred values.
For 2nd international scientific practical conference on new technologies in oil gas production baku azerbaijan, the final configuration should be checked against the project datasheet and the full operating envelope. The aim is straightforward: a measurement that works under real plant conditions, can be maintained without drama and gives operators information they can use.
On September 6, the 2nd International Scientific-Practical Conference on ”New Technologies in Oil & Gas Production” has started at the ”Oil Gas Scientific Research Project” Institute of SOCAR in Baku. In his opening remarks, Director of the Institute Fakhraddin Ismayilov welcomed the participants and informed about the goals and purposes of the conference attended by nearly 150 foreign companies. SOCAR President Rovnag Abdullayev made a report on ”Oil strategy of the independent Republic of Azerbaijan and SOCAR’s potential”.
SOCAR First Vice President, Academician Khoshbakht Yusifzadeh made a report on ”The results of deep offshore exploration in the Caspian Sea”. President of Modcon Shahnovsky has submitted a paper ”Modern analysis methods and enhancement in oil and gas industry”.
